Shooting

NFUSED® Weapons Cleaner & Lubricant

NFUSED® Weapons Cleaner

A highly effective gun cleaner safe for use around varnishes, wood gunstocks,
camouflage finishes, polymer stocks and frames. Contains corrosion inhibitors
to prevent flash rusting of freshly-cleaned firearms. Contains NO ammonia. After
cleaning, use NFUSED® Lubricant for the ultimate lubrication and protection.

BENEFITS OF NFUSED®

·      Water Based

·      Contains corrosion inhibitors

·      Prevents flash rusting of freshly-cleaned
firearms

·      Contains NO Ammonia

·      Can be used indoors

RESULTS:

·      No Solvent Smell

·      Removes old oils/lubricants

·      Friendly Cleaner

NFUSED® Weapons Lubricant

NFUSED® is a synthetic dry metal conditioner which molecularly bonds to heated gun metal making it self-lubricating under the toughest environmental conditions. Unlike traditional gun oils, NFUSED® protects the metal surface by a super tough regenerating hi density electro-chemical bonding process. NFUSED® is not a temporary coating. It seals and conditions the heated metal leaving a “dry” lubricated surface that reduces heat, improves performance and prevents jamming, and corrosion. Ease of cleaning is an added bonus!

BENEFITS OF NFUSED®

• Near dry and constant lubrication
• Minimal Material build-up
• Highly concentrated
• Permeates the metal surface
• Corrosion inhibitors
• Extreme temperature range

RESULTS:                            

·      Prevents jamming

·      Longer interval between cleanings

·      Inhibits corrosion

·      Ease of cleaning

• Improved performance
• Doesn’t gum up
• Performs in harsh environments

NFUSED® Instructions for Weapon Applications

MAKE SURE FIREARM IS FULLY UNLOADED

Weapons Cleaning: 

Spray into bore or action to dissolve and remove fouling, oil, and grease. Brush heavy deposits and reapply to rinse away fouling. Wipe dry. After cleaning, use NFUSED® lubricant for the ultimate lubrication and protection. 

Weapons Lubrication: 

Apply a very thin film (4-6 drops of NFUSED) to cotton lint-free cloth/patch to all clean metal surfaces of the firearm.  Let NFUSED® absorb into metal for 10 to 15 minutes. Heat quickens the process such as a hair dryer, heat gun, etc.  Let metal surfaces cool. Reapply and heat again.  After three initial applications, re-lubricate every 1-2 thousand rounds fired.  Wipe completely to avoid sand and dust contamination.